Zhone mxk configuration guide

MXK-F™ Chassis - MXK-F1421 is designed to be fully-compliant to meet the ETSI EN 300 standard for indoor cabinets and contains 16-access multi-service subscriber slots, and 2-network facing slots. MXK-F1421 can be mounted directly into a 21″ wide rack, and into a 23″ rack with adapter brackets. The chassis is equipped with a cable Command Line Interface. Clear the system log. Enter Configuration mode. Copy from one file to another. Set the time zone and date format. If user is in User mode, positions interface at top of menu tree. Terminate current session. Download or apply new firmware. Enable or disable paging ( more prompt) for this session. Zhone's MXK-190 also includes Smart OMCI™, Zhone's unique approach to GPON ONT configuration and management. To improve ease of use for service providers, the Smart OMCI modules present a comprehensive, intuitive interface on top of a 100% standard-compliant and proven interoperable implementation of the ITU G984.4 OMCI protocol. This MXK-194 (4) SFP-based GPON Regulatory Compliance MXK-198 (8) SFP-based GPON Safety: CSA 22.2 No. 60950-1, EN 60950-1, IEC 60950-1, UL 60950-1 Serial Craft Management Interface/ 10/100BT Management Interface EMC Emissions: FCC Part 15 Class A, EN 55022 Class A, ICES-003 Class A MXK 319 3U: 13.3 x 43.8 x 28.3 cm, Line Cards: 7; Front Card Access Unit Level: Terminal for Command Line Interface , Web GUI based Management MXK 819: 8U: 35 .5 x 43.8 x 28.3 cm, Line Cards: 14; Front Card Access Network Level: Zhone Management System via SNMP v2c for GUI, with The MXK-F™ chassis architecture is designed around a dual star design with redundant ultra high-speed links to each subscriber line card slot for future-proof support of today's and tomorrow's bandwidth-hungry fiber-based subscriber services. Also MXK-F™ management control and aggregation switch fabric functions reside on two separate cards, each of which can be equipped in a redundant Administrative user name is admin, password is zhone. MXK Configuration Guide 61 MXK Operations, Administration, and Maintenance. A single record for the Ethernet interface on the uplink card in slot a exists. No other profiles to configure physical interfaces exist. The uplink card in slot a is enabled. MXK Product Profile Bandwidth Bandwidth Changes Changes Everything! Everything! LEARN MORE Experience the Network of the Future Today Experience The Next Wave of Access Network Evolution As telecom operators face ever more competition, they are experiencing an accelerating shift in the demands placed on their access networks. Over the past several years, efforts in response to competitive MXK-F Hardware and Installation Guide Manual MXK-CHASSIS F1421, MXK-CHASSIS F1419, Zhone Technologies Inc. MXK-CHASSIS F1421, MXK-CHASSIS F1419, Zhone Technologies Inc. Anatel 01230-16-01613 operating details While Zhone offers a full line of outside cabinets engineered specifically to support MXK-F platforms with a wide range of powering, and fiber termination options, all Zhone MXK-F™ chassis are ETSI indoor cabinet compliant. This means that any MXK-F™ can be mounted within a 300mm deep cabinet, or two of them can be mounted back-to-back in a MXK-319, 819, 823 Series Demands on access networks are increasing at an accelerating rate, requiring a clean-sheet approach to a truly scalable multi-service architecture. DZS' MXK™ intelligent terabit access concentrator reflects this new approach, with non-blocking Zho