Work zone air impact wrench manual

Air-impact wrenches vibrate while being used. Use a torque wrench to apply the proper torque to bolts and nuts. Do not over torque bolts and nuts with an air-impact wrench. Carry an air-impact wrench by the handle or body; never carry an air impact wrench by the air hose. Disconnect the air hose before installing or adjusting impact wrench These Air Impact Wrenches are designed to remove and install threaded fasteners. For Additional information refer to Air Impact Wrenches Product Safety Information Manual Form 04580916. Manuals can be downloaded from irtools.com. Power Management System December 19, 2021 December 21, 2021 Leave a comment on CENTRAL PNEUMATIC 66984 3/4-Inch Heavy Duty Air Impact Wrench Owner's Manual. Work Area Safety. Keep work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or Each time a Series 2705P1 Impact Wrench is disassembled for maintenance and repair or replacement of parts, lubricate the tool as follows: Work approximately 4 to 6 cc of Ingersoll Rand No. 100 Grease into the impact mechanism. Coat the Anvil (43) lightly with grease around the Hammer Case Bushing (40). Inject approximately 1 to AIR IMPACT WRENCH MODEL NO: CAT141 & 142 PART NO: 3120155 / 3120156. 2 WORK ENVIRONMENT 1. Keep the work area clean and tidy. 2. Dress appropriately - Do not wear loose clothing or jewellery. 10.Do not use the tool for any purpose than that described in this manual. 11.Do not carry out any alterations or modifications to the tool. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. This Heavy-Duty Air Ratchet Wrench is designed to work in a professional capacity to loosen over-tightened nuts and bolts. TECHNICAL SPECIFICATIONS Item 100804 100805 Drive 1 EARTHQUAKE EQ12YXT Air Impact Wrenches Owner's Manual. 2 SAFETY. 3 Functional Description. 4 Initial Tool Set Up/Assembly. 5 Operating Instructions. 6 General Operating Instructions. 7 User-Maintenance Instructions. 7.1 Cleaning, Maintenance, and Lubrication. 7.2 Troubleshooting. Operator's manual Printed Matter No. 8940175472 Date: 2018-10 Issue No. 02 Impact Wrench Valid from Serial No. 00001 - 99999 Model: CP7769 CP7769-6 CP7779 WARNING To reduce risk of injury, everyone using, installing, repairing, main-taining, changing accessories on, or working near this tool MUST OPERATOR'S MANUAL Printed Matter No. 8940175527 Date: 2018-09 Issue No. 01 Impact Wrench Valid from Serial No. G00001 - G99999 Model: CP7748 CP7748-2 WARNING To reduce risk of injury, everyone using, installing, repairing, main-taining, changing accessories on, or working near this tool MUST read and understand safety instructions (P/N The WORKZONE Torque Wrench is a pretty simple setup. It comes with a 1/2″ Drive (12.7mm) calibrated in foot/pounds from 20 to 150. (It has foot/pounds on one side and meter/kilograms on the other in case you need metric.) It comes with a 125 mm extension and four sockets (17 mm, 19 mm, 21 mm, and 22 mm). The wrench also comes in a compact AIR IMPACT WRENCH MODEL NO: CAT131 & 132 PART NO: 3120145 / 3120146. 2 WORK ENVIRONMENT 1. Keep the work area clean and tidy. 2. Dress appropriately - Do not wear loose clothing or jewellery. 10.Do not use the tool for any purpose than that des