Thermic power pack charging instructions

2 Ni-MH battery packs (Supermax Powerpack) – rechargeable, with integrated heat For recharging, only use the supplied Therm-ic Supermax Global Charge. Thermic Liner Quick Start Guide. WARNING: Battery connector is protected with black tape, remove the black Attach USB cable to charging cable on medial If an upgrade is available, be sure your pack is half charged and don't touch This to prevent potential problems during upgrades. If the Heat is in pause mode via the app, you can keep the battery packs ON and connected to your phone. therm-ic max powerpack Manual Online: Methods For Attaching The Powerpacks. charged status. The Powerpack must be turned off (level 0) and disconnected If water does enter the connectors, drain the Powerpack and let it dry. For recharging, only use the supplied Therm-ic Supermax Global Charge. It is designed for If water does enter the connectors, drain the Powerpack and let it dry. For recharging, only use the original Therm-ic charger. It is designed for indoor use Charging the Power Packs: The instruction booklet that comes with the power packs is disconcertingly thick, but it's really only about 3 tinyKeep these instructions in a safe place and make sure other connection point and power supply socket and Use only the Therm-ic USB charger supplied. pOWERpACK. please read the instructions for use carefully before Ni MH battery packs (Max powerpack) ?or recharging, only use the Therm ic original. Do not throw C-Pack battery into an open fire, as there is a risk of explosion. IMPORTANT: For recharging, only use the supplied. USB Therm-ic charging cable.