Reznor udas installation manual

General This manual applies only to venting and combustion air inlet instructions and must be used with the installation manual that was shipped with the heater. If either manual is missing, contact your distributor before beginning installation. Venting and Combustion Air Requirements for Separated Combustion Model UDAS The Reznor UDAS series of products feature separated combustion chambers and are safe to use in many normally difficult environment. Reznor UDAS-45 45,000 BTU V3 Vent Gas Fired Separated Combustion Unit Heater . Out Stock, and feature better efficiency, easier installation, and a new Model UDAS heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA). Reznor® V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. installation. This manual applies only to venting instructions and must be used with the installation manual. Both manuals are shipped with the heater. If either manual is missing, contact your distributor before beginning installation. The instruc-tions in this manual apply to fan type Model UDAP and blower type Model UDBP. REZNOR PART # 120698 (DOWNLOAD) INSTALLATION INSTRUCTIONS (DOWNLOAD) BRACKET MANUAL $24.00: UDAS CC2 30-125. Reznor CC2 Vertical Roof Vent Kit For Reznor UDAS/UDBS-30-125 Gas Fired Unit Heaters Reznor 205895 Vertical Roof Vent Kit is a vertical vent kit for . Reznor UDAS and UDBS 30-125 model gas fired unit heaters. Reznor UDAS-45-AC2 Gas Fired Unit Heater is a 115 volt, gas fired separated combustion unit heater designed to provide efficient heating. It is certified for residential and commercial/industrial use to provide a 45000 BTU/hr. output with an 82-83% thermal efficiency. UDAS, UDBP , and UDBS Unit Heaters IMPORTANT 1. Always include complete heater model and serial number so Valve (manual) 20 20 20 20 Vent Cap (same as Option CC1) 16