Machinery handbook wrench clearances

socket clearance calculator
socket clearance chart
metric socket clearance chart
wrench clearance metric
wrench clearance chart
hex socket clearance chart
aisc wrench clearancewrench clearance calculator

Machinery's Handbook 27th Edition. 1530 WRENCH CLEARANCES. Wrench Openings for Nuts ANSI/ASME B18.2.2-1987 (R1999), Appendix. Max. a Width Wrench Openingb Engineering information on Wrench / spanner clearances around screw Heads. similar to Information in Machinerys Handbook; Icrank Wrench Clearances. A ANSI Standard ( continued ) socket head cap screws 71 , 74–75 spline NC 172 Bolt head markings , inch 69 wrench and socket clearances 85-86 Bolt holeTable 19: Wrench Clearances for Open End Engineers Wrench 15 and Socket Wrench (Regular Length) From SAE Machinery's Handbook Pocket Companion. A good general reference for wrench clearances for all styles of standard wrenches is the "Machinery Handbook" published by the Industrial found in the Index of Interactive Equations on Machinery's Handbook 29 CD. 2 shows a thread-cutting tool with front clearance angle B. Angle A equals Wrench Clearance Chart data derived from SAE drafting manual and ANSI/ASME B18.2.2-1987 (R1999) wrench opening for nuts. This represents the recommended