Hdmi compliance test specification 1.4 pdf

Key Features Test HDMI 2.0 & 1.4b Source Compliance with your oscilloscope at a click of the button. Displays the HDMI stream/frame visually as it is in the specification. • Compliance test specification (CTS) is under under general membership review. • Sources fail if they don't implement fallback rules in DP 1.4 specification • Sclaoinnrkeress cftaliyl irfe Supports HDMI 1.4b displays Supports 4K 30 Hz displays No adapter required for connection from USB Type-C Sink. Protocol Test on U4998A is supported up to HDMI 1.4b. Txsupported in SVoaulricferame SWRx. Reference Document. • High-Definition Multimedia Interface (HDMI) Specification Version 2.0 • High-Definition Multimedia Interface (HDMI) Version 2.0 Compliance Test Specification. The MHL specification version 1.0 was released in June 2010,[8] and the Compliance Test Specification (CTS) was released in MHL is an adaptation of HDMI intended for mobile devices such as smartphones and tablets.[14] Unlike DVI, which is compatible with HDMI using only passive cables HDMI Licensing, LLC. Confidential High-Definition Multimedia Interface Compliance Test Specification Version 1.4a Hitachi, Ltd. Panasonic Corporation Philips Consumer Electronics HDMI Compliance Test Specification Version 1.4a HDMI Licensing · HDMI 2.0 Ultra HD/4K 50/60Hz 4:4:4 color format support · Signal Path Analysis - Source and sink up to 18G HDMI signals · HDR (High Dynamic Range) testing & analysis · Three HDCP output option (HDCP 2.2, 1.4, and None) · CEC compliance testing · Analysis & Emulation of EDID data · 55 HDMI Licensing, LLC, the agent responsible for licensing the High-Definition Multimedia Interface (HDMI) specification, today announced The complete HDMI Specification Version 1.4a, along with the 1.4a version of the Compliance Test Specification (CTS), is available to Adopters on the HDMI For compliance testing, an additional ISI channel will be connected between the signal source (test instrument) and the Rx test channel SMP This test is run on all Tx lanes that support high speed signling. The DUT is configured to output the high speed Tx compliance pattern (CRPAT) on the HDCP 2.x Interface Independent Adaptation is interface independent and therefore is available and licensed for any interface choosing to adopt and license it under the appropriate agreement(s). Such interfaces include, but HDCP 2.3 IIA Compliance Test Specification (1.4MB, PDF - April, 2019). The differential trace impedance of HDMI is specified at 100?±15% in Test ID 8-8 in HDMI Compliance Test Specification Rev.1.2a and 1.3a. 1.3a has a more relaxed specification which allows an occurrence of a single excursion out to a max/min of 100?±25% and of a duration less than 06 CONFIGURING HDMI. 07 FEATURES. 08 Compliances. Table of contents. NVIDIA makes no representation or warranty that products based on these specifications will be suitable for any specified use without further testing or modification. 6 Compliance Test Specification 1.2 The test definitions are intended to provide a description of the purpose, resources, and procedures to each test. The required cable configurations are listed in table 3 below. ? ? HDMI Cables - 2 x 2-meter HDMI 1.4 complaint cables with standard Type A connectors 6 Compliance Test Specification 1.2 The test definitions are intended to provide a description of the purpose, resources, and procedures to each test. The required cab