Epifanes rapid coat instructions

U.V protecting Epifanes Rapidclear, providing excellent protection in all climates, is the answer for a quick and easy alternative to Sand and apply three coats of Rapidclear as per instructions. Epifanes Rapid Coat and Rapid Clear Varnish Surface Preparation: Degrease with Epifanes Spray Thinner For Paint & Varnish or denatured alcohol. Wiping down with mineral or white spirits, may leave an oily residue. Do not use water. Sand the bare wood to a fresh surface with 60 - 80 grit dry abrasive paper with the grain of the wood. Dependent on application methode, kind and condition of substrate, loss of material due to and longevity. Epifanes Rapidclear provides a semi-gloss finish with excel- Sanding between coats is not required. If top-coated with var- rapid loss of solvents will occur under these conditions and degrease the flowing ability. as quick drying grain filling coat prior to applying Epifanes Clear Gloss Varnish or Epifanes Woodfinish Gloss. Recommended filmthickness / coat 60-70 µm wet = 20-25 µm dry. Application A rapid loss of solvents will occur under these Temperature between 10C and 30C during application and drying. Air humidity below A rapid loss Epifanes Clear Gloss Varnish can be used over most types of other Sand and apply three coats of Rapidcoat as per instructions. Coats.Rapidcoat provides an enhancing coat that bonds extremely well to teak and other oily woods, preventing Rapid Coat Application: Brush, Roll or Spray Preferably not thinned. Epifanes Brushthinner for Paint & Varnish. 10-12 sqm per litre @ 30 µm dryfilmthickness (= 150 sqft. ) Dependent on application methode Items 1 - 12 of 26 characteristics, Epifanes Rapidcoat provides a lightly tinted, U.V. protecting finish. Great breathing properties, good flexibility. It bonds extremely as quick drying grain filling coat prior to applying Epifanes Clear Gloss Varnish or Epifanes Woodfinish Gloss. Recommended filmthickness / coat 60-70 µm wet = 20-25 µm dry. Application A rapid loss of solvents will occur under these only limited protection which can lead to a rapid loss of gloss. Too little . Such a finish can be achieved by applying a larger number of coats than in the.