Apc ups manual self test

Download & View Apc Ups Manual as PDF for free. More details. Words: 2,383; Pages: 2; Preview; Full text; APC Back-UPS Pro® 1000/1050/1100/1400 990-2012F Revision 7 12/03 Self-test The UPS performs a self-test automatically when turned "On", and every two weeks thereafter (by default). Automatic self-test eliminates the need for Press the ON key once to turn on the UPS. The UPS is not connected to AC power. Be sure the power cable is securely connected to the unit and to the AC power The input circuit breaker has tripped. The unit shows very low or no input AC voltage. The battery connector plug is not securely connected. supply. Reduce the load on the UPS. Open your browser and enter the IP address of the APC UPS. On the login screen, use the default username and default password. After a successful login, you will be sent to the APC UPS Dashboard. On the webinterface, access the Tests menu and select the UPS option. Select the Runtime calibration option and click on the Apply button. Perform a self-test as described in the Smart-UPS user manual. If the LED remains illuminated after performing these steps, refer to the troubleshooting table below. APC SMV Series 750 VA Easy UPS User Manual. Next Post Next post: APC ASTE-6Z8LRP Smart-UPS Uninterruptible Power Supply User Manual. Leave a comment . Self-Test Every 14 days (336 hours) Every 7 days (168 hours), Every 14 days (336 hours), On Startup Only, No Self-Test Set the interval at which the UPS will execute a self-test. UPS ID Uniquely identify the UPS, (i.e. server UPS_IDEN Up to eight charac-ters (alphanumeric) name or location) for network man-agement purposes. Date of Last A self test can be initiated in any one of five ways: PowerChute plus software. SmartSlot accessory. Smart-UPS front panel test button. Automatic timer- every two weeks from turn on. Start up of the UPS. If the above conditions are not satisfied, a power failure is simulated, a runtime calibration is initiated, or the UPS's plug is pulled from Tutorial for manually starting a Self-Test and monitoring battery system performance on APC Symmetra™ PX 10-80kW UPS (PX1 models SYCF40KF, SYCF80KF, ISX20KF) Smart-UPS C 1000/1500 VA 120/230 Vac Tower / Rack-Mount 2U 1. Connect equipment to the outlets in the rear of the UPS. 2. Connect the APC Smart Connect port to your nearest network switch using the cable provided. 3. Connect the UPS input to AC power. 4. Press the main power button on the UPS display to turn on the UPS output. This is a video tutorial on how to initiate a self-test in SRV2KL/3KL-IN through the display. Learn More: apc.com/in/en/faqs/home/Use this menu Smart-UPS C 1000/1500 VA 120/230 Vac Tower / Rack-Mount 2U. Connect equipment to the outlets in the rear of the UPS. Connect the APC Smart Connect port to your nearest network switch using the cable provided. Connect the UPS input to AC power. Press the main power button on the UPS display to turn on the UPS output. SNMP. This check monitors two OIDs of APC Symmetra UPS devices: - The result of the last self test. - The last date of the self test run. You can configure upper levels for WARN / CRIT (default: 0, 0) The check goes WARN / CRIT if the date of the last self test exceeds the upper levels. The check goes CRIT if the test result is "failed". APC Smart UPS Self Test (SMT750i) APC Smart UPS Self Test (SMT750i)